FP-9000ⅢDF for Flat panels
FP-9000ⅢDF
for the Flat Panel
Outline
FP series is an outgas collector from flat panel samples such as LDC or PDP. FP-9000III is designed to collect surface outgas in the quartz oven with elevated temperature.
Feature
The oven plate has a space to place a flat panel sample and fix it firmly that makes accurate samplings possible.
Able to collect outgas from flat panel surface on the oven plate at maximum temp. at 400°C.
Able to collect outgas only from surface side, whilst outgas from backside is discharged completely by vacuum pump.
Oven temperature can go up to 400°C (when backing)
Chiller unit is the standard accessory for time saving of cool-down.
Able to install in a clean room
Safety System : Safety rock, Emergency stop, Leak detector, Overheat sensor stopper
Multi-step temperature, split sampling, sample tube cooler when sampling are available as option.
Touch panel is improved for user friendly operation.
Outline
FP series is an outgas collector from flat panel samples such as LDC or PDP. FP-9000III is designed to collect surface outgas in the quartz oven with elevated temperature.
Feature
The oven plate has a space to place a flat panel sample and fix it firmly that makes accurate samplings possible.
Able to collect outgas from flat panel surface on the oven plate at maximum temp. at 400°C.
Able to collect outgas only from surface side, whilst outgas from backside is discharged completely by vacuum pump.
Oven temperature can go up to 500°C (when backing)
Chiller unit is the standard accessory for time saving of cool-down.
Able to install in a clean room
Safety System : Safety rock, Emergency stop, Leak detector, Overheat sensor stopper
Multi-step temperature, split sampling, sample tube cooler when sampling are available as option.
Touch panel is improved for user friendly operation.
By vacuum pump, it enables to collect outgas only from surface side, whilst outgas from backside is discharged completely.
* The notch can be customized.
Specifications
Specifications
| FP-9000ⅢDF | |
| Sampling method | Hat shaped collecting method |
| Sample size | Smaller than 200 mm ID |
| Oven material | Stainless SUS316L |
| Oven heating | Surface and Bottom Individual heating method |
| Heating temp. | Max 400°C (up to 500°C for baking) |
| Cooling | Cooling water circulation |
| Heater pipe | Inside inert treated |
| Purge gas | N2 or He for general use, Flow rate up to 500 ml/min |
| PAT cooling unit (option) | Electronic cooling |
| Overheat prevention sensor | Power 15A Sensitivity current 30mA |
| Emergency stop | Available |
| Safety system | Safety interlock system |
| Pressurization method | Motor drive |
| Dimensions | 1140(W) x 1106(H) x 750(D) mm |
| Power supply | Single phase AC200V, 20A AC200V, 30A |
| Weight | 280 Kg |
| FP-9000ⅢDF | |
| Sampling method | Hat shaped collecting method |
| Sample size | Smaller than 200 mm ID |
| Stainless SUS316L | Stainless SUS316L |
| Oven heating | Surface and Bottom Individual heating method |
| Heating temp. | Max 400°C (up to 500°C for baking) |
| Cooling | Cooling water circulation |
| Heater pipe | Inside inert treated |
| Purge gas | N2 or He for general use, Flow rate up to 500 mL/min |
| PAT cooling unit (option) | Electronic cooling |
| Overheat prevention sensor | Power 15A Sensitivity current 30mA |
| Emergency stop | Available |
| Safety system | Safety interlock system |
| Pressurization method | Motor drive |
| Dimensions | 1140(W) x 1106(H) x 750(D) mm |
| Power supply | Single phase AC200V, 20A AC200V, 30A |
| Weight | 280 Kg |
